3D Printing Construction Market Research Report: Types,Volume,Revenue and Industry Analysis 2028

The Global 3D Printing Construction Market is expected to grow by 2025 at a CAGR of 268%.

The advent of 3D printing is arguably one of the most disruptive innovations that have developed over past two decades. Developing from an optimistic attempt made by Professor Behrokh Khoshnevis, University of South Carolina, to create a 3D printed wall, the inclusion of 3D printing in construction has observed huge development. Furthermore, 3D printing is extensively used in various industries, including healthcare, aviation, and engineering. For several decades, the construction sector has continued dormant in terms of technological advancements. However, the introduction of 3D printing in construction has increased tremendous popularity, as a greater number of stakeholders are recognizing the true potential of this technology.3D Printing Building Market is suffering important development due to growing adoption of building information modelling. Building information modelling provides a cooperative platform and shared knowledge resource for architecture, engineering, construction professionals, and other stakeholders for effective execution of planning, design, operational, management, and construction decisions. Furthermore, factors such as growth in development of commercial buildings in the emerging economies, increasing need for affordable housing solutions, and adoption of environment regulations to reduce carbon emissions further fuel the growth of the 3D printed buildings market. These buildings offer affordable housing solutions and are increasingly being used in poverty stricken and disaster affected areas. The ability of 3D printers to construct a house in a few days, coupled with increased awareness among consumers, technological advancement, rising investment in research and development, and use of wider range of materials are some factors expected to provide growth opportunities during the estimate period.
The global 3D Printing Construction market is segregated on the basis of Construction Method as Powder Bonding and Extrusion. Based on End-Use Sector the global 3D Printing Construction market is segmented in Infrastructure and Building. Based on Material Type the global 3D Printing Construction market is segmented in Metal, Composite, Concrete, and Others.
The global 3D Printing Construction market report provides geographic analysis covering regions, such as North America, Europe, Asia-Pacific, and Rest of the World. The 3D Printing Construction market for each region is further segmented for major countries including the U.S., Canada, Germany, the U.K., France, Italy, China, India, Japan, Brazil, South Africa, and others.

Competitive Rivalry
Spetsavia, Lifetec Construction Group Inc, Be More 3D, 3D Printhuset, Acciona, Yingchuang Building Technique, Xtreee, Apis Cor, Monolite UK, Csp S.R.L., and others are among the major players in the global 3D Printing Construction market. The companies are involved in several growth and expansion strategies to gain a competitive advantage. Industry participants also follow value chain integration with business operations in multiple stages of the value chain.

The 3D Printing Construction Market has been segmented as below:

3D Printing Construction Market, By Construction Method

3D Printing Construction Market, By End-Use Sector3D Printing Construction Market, By Material Type

• Metal
• Composite
• Concrete
• Others

3D Printing Construction Market, By Region

• North America
• Europe
• Asia-Pacific
• Rest of the World

3D Printing Construction Market, By Company

• Spetsavia
• Lifetec Construction Group Inc
• Be More 3D
• 3D Printhuset
• Acciona
• Yingchuang Building Technique
• Xtreee
• Apis Cor
• Monolite UK
• Csp S.R.L.
• Cybe Construction
• Sika
• Mx3D
• Contour Crafting
• Icon
• Betabram
• Rohaco
• Imprimere Ag
• Beijing Huashang Luhai Technology
• Total Kustom

The report covers:

• Global 3D Printing Construction market sizes from 2015 to 2024, along with CAGR for 2018-2024
• Market size comparison for 2017 vs 2024, with actual data for 2017, estimates for 2018 and forecast from 2020 to 2025
• Global 3D Printing Construction market trends, covering comprehensive range of consumer trends & manufacturer trends
• Value chain analysis covering participants from raw material suppliers to the downstream buyer in the global 3D Printing Construction market
• Major market opportunities and challenges in forecast timeframe to be focused
• Competitive landscape with analysis on competition pattern, portfolio comparisons, development trends and strategic management
• Comprehensive company profiles of the key industry players

Report Scope:
The global 3D Printing Construction market report scope includes detailed study covering underlying factors influencing the industry trends.
The report covers analysis on regional and country level market dynamics. The scope also covers competitive overview providing company market shares along with company profiles for major revenue contributing companies.
The report scope includes detailed competitive outlook covering market shares and profiles key participants in the global 3D Printing Construction market share. Major industry players with significant revenue share include Spetsavia, Lifetec Construction Group Inc, Be More 3D, 3D Printhuset, Acciona, Yingchuang Building Technique, Xtreee, Apis Cor, Monolite UK , Csp S.R.L., and others.

Reasons to Buy this Report:

• Gain detailed insights on the 3D Printing Construction industry trends
• Find complete analysis on the market status
• Identify the 3D Printing Construction market opportunities and growth segments
• Analyse competitive dynamics by evaluating business segments & product portfolios
• Facilitate strategy planning and industry dynamics to enhance decision making

Customization
Customized report as per the requirement can be offered with appropriate recommendations1.

Request Sample Report from here: https://www.marketresearchengine.com/3d-printing-construction-market

Table of Contents
Introduction
1.1 Key Insights
1.2 Report Overview
1.3 Markets Covered
1.4 Stakeholders
2. Research Methodology
2.1 Research Scope
2.2 Market Research Process
2.3 Research Data Analysis
2.4.1 Secondary Research
2.4.2 Primary Research
2.4.3 Models for Estimation
2.5 Market Size Estimation
2.5.1 Bottom-Up Approach – Segmental Market Analysis
2.5.2 Top-Down Approach – Parent Market Analysis
3. Executive Summary
4. Market Overview
4.1 Introduction
4.2.1 Drivers
4.2.2 Restraints
4.2.3 Opportunities
4.2.4 Challenges
4.2 Porter’s Five Force Analysis
5. 3D Printing Construction Market, By Construction Method
5.1 Introduction
5.2 Powder Bonding
5.2.1 Market Overview
5.2.2 Market Size and Forecast
5.3 Extrusion
5.3.1 Market Overview
5.3.2 Market Size and Forecast
6. 3D Printing Construction Market, By End-Use Sector
6.1 Introduction
6.2 Infrastructure
6.2.1 Market Overview
6.2.2 Market Size and Forecast
6.3 Building
6.3.1 Market Overview
6.3.2 Market Size and Forecast
7. 3D Printing Construction Market, By Material Type
7.1 Introduction
7.2 Metal
7.2.1 Market Overview
7.2.2 Market Size and Forecast
7.3 Composite
7.3.1 Market Overview
7.3.2 Market Size and Forecast
7.4 Concrete
7.4.1 Market Overview
7.4.2 Market Size and Forecast
7.5 Others
7.5.1 Market Overview
7.5.2 Market Size and Forecast
8. 3D Printing Construction Market, By Geography
8.1 Introduction
8.2 North America
8.2.1 North America 3D Printing Construction, By Construction Method
8.2.2 North America 3D Printing Construction, By End-Use Sector
8.2.3 North America 3D Printing Construction, By Material Type
8.3 Europe
8.3.1 Europe 3D Printing Construction, By Construction Method
8.3.2 Europe 3D Printing Construction, By End-Use Sector
8.3.3 Europe 3D Printing Construction, By Material Type
8.4 Asia-Pacific
8.4.1 Asia-Pacific 3D Printing Construction, By Construction Method
8.4.2 Asia-Pacific 3D Printing Construction, By End-Use Sector
8.4.3 Asia-Pacific 3D Printing Construction, By Material Type
8.5 Rest of the World
8.5.1 Rest of the World 3D Printing Construction, By Construction Method
8.5.2 Rest of the World 3D Printing Construction, By End-Use Sector
8.5.3 Rest of the World 3D Printing Construction, By Material Type
9. Competitive Insights
9.1 Key Insights
9.2 Company Market Share Analysis
9.3 Strategic Outlook
9.3.1 Mergers & Acquisitions
9.3.2 New Product Development
9.3.3 Portfolio/Production Capacity Expansions
9.3.4 Joint Ventures, Collaborations, Partnerships & Agreements
9.3.5 Others
10. Company Profiles
10.1 Spetsavia

10.1.1 Company Overview
10.1.2 Product/Service Landscape
10.1.3 Financial Overview
10.1.4 Recent Developments
10.2 Lifetec Construction Group Inc
10.2.1 Company Overview
10.2.2 Product/Service Landscape
10.2.3 Financial Overview
10.2.4 Recent Developments
10.3 Be More 3D
10.3.1 Company Overview
10.3.2 Product/Service Landscape
10.3.3 Financial Overview
10.3.4 Recent Developments
10.4 3D Printhuset
10.4.1 Company Overview
10.4.2 Product/Service Landscape
10.4.3 Financial Overview
10.4.4 Recent Developments
10.5 Acciona
10.5.1 Company Overview
10.5.2 Product/Service Landscape
10.5.3 Financial Overview
10.5.4 Recent Developments
10.6 Yingchuang Building Technique
10.6.1 Company Overview
10.6.2 Product/Service Landscape
10.6.3 Financial Overview
10.6.4 Recent Developments
10.7 Xtreee
10.7.1 Company Overview
10.7.2 Product/Service Landscape
10.7.3 Financial Overview
10.7.4 Recent Developments
10.8 Apis Cor
10.8.1 Company Overview
10.8.2 Product/Service Landscape
10.8.3 Financial Overview
10.8.4 Recent Developments
10.9 Monolite UK
10.9.1 Company Overview
10.9.2 Product/Service Landscape
10.9.3 Financial Overview
10.9.4 Recent Developments
10.10 Csp S.R.L.
10.10.1 Company Overview
10.10.2 Product/Service Landscape
10.10.3 Financial Overview
10.10.4 Recent Developments
10.11 Cybe Construction
10.11.1 Company Overview
10.11.2 Product/Service Landscape
10.11.3 Financial Overview
10.11.4 Recent Developments
10.12 Sika
10.12.1 Company Overview
10.12.2 Product/Service Landscape
10.12.3 Financial Overview
10.12.4 Recent Developments
10.13 Mx3D
10.13.1 Company Overview
10.13.2 Product/Service Landscape
10.13.3 Financial Overview
10.13.4 Recent Developments
10.14 Contour Crafting
10.14.1 Company Overview
10.14.2 Product/Service Landscape
10.14.3 Financial Overview
10.14.4 Recent Developments
10.15 Icon
10.15.1 Company Overview
10.15.2 Product/Service Landscape
10.15.3 Financial Overview
10.15.4 Recent Developments
10.16 Betabram
10.16.1 Company Overview
10.16.2 Product/Service Landscape
10.16.3 Financial Overview
10.16.4 Recent Developments
10.17 Rohaco
10.17.1 Company Overview
10.17.2 Product/Service Landscape
10.17.3 Financial Overview
10.17.4 Recent Developments
10.18 Imprimere Ag
10.8.1 Company Overview
10.8.2 Product/Service Landscape
10.8.3 Financial Overview
10.8.4 Recent Developments
10.19 Beijing Huashang Luhai Technology
10.19.1 Company Overview
10.19.2 Product/Service Landscape
10.19.3 Financial Overview
10.19.4 Recent Developments
10.20 Total Kustom
10.20.1 Company Overview
10.20.2 Product/Service Landscape
10.20.3 Financial Overview
10.20.4 Recent Developments

About MarketResearchEngine.com
Market Research Engine is a global market research and consulting organization. We provide market intelligence in emerging, niche technologies and markets. Our market analysis powered by rigorous methodology and quality metrics provide information and forecasts across emerging markets, emerging technologies and emerging business models. Our deep focus on industry verticals and country reports help our clients to identify opportunities and develop business strategies.

Media Contact
Company Name: Market Research Engine
Contact Person: John Bay
Email: john@marketresearchengine.com
Phone: +1-855-984-1862
Country: United States
Website: https://www.marketresearchengine.com/

COMTEX_439417724/2582/2023-09-02T13:44:36